TL;DR: Network Port TV Stick Board
AndroidSBC software desk: Android 12 baseline and staged OTA channel published for the H618 dongle family serving Toulouse, France. The WF-H618-02 Allwinner H618 Android motherboard spans the 4K60 streaming stick build for OTT platforms and eleven sister configurations in the WF-H618 series, all built on the H618 quad-core ARM Cortex-A53 1.5GHz SoC with the ARM Mali-G31 MP2 GPU, HDMI 2.0a 4K*2K UHD output at 60Hz with HDR pass-through, and Android 12 with OTA upgrade firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-H618 family from the Longgang source factory in Shenzhen to Toulouse and France importers who run streaming sticks, Android TV boxes, IPTV channel lineups, digital signage networks, casting programmes and smart home hubs.
About AndroidSBC and the Allwinner H618 Android Motherboard Family
The WF-H618 family from AndroidSBC, a Wanlin Manufacturing Group export brand, is a single-silicon HDMI dongle board line: all twelve configurations share the Allwinner H618 SoC, the Mali-G31 MP2 GPU and one Android 12 build. For Toulouse buyers the practical consequence is that a pilot batch qualified on one configuration behaves the same way on the next, whether the screen is a hotel TV or a retail video wall. Each production lot is burned in for 72 hours with the HDMI output live, the playback loop running and the remote path exercised, and the serial number is logged against the test record so a Toulouse partner can trace a single unit back to its run.
WF-H618-02 Technical Specifications
| Parameter | AndroidSBC WF-H618-02 (4K60 streaming stick build for OTT platforms) | Industry Average |
|---|---|---|
| Processor | H618 quad-core ARM Cortex-A53 1.5GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 28nm | Older 40nm process |
| GPU | Mali-G31 MP2 | Older Mali-400 or basic 2D GPU |
| Memory | 2GB LPDDR4 | DDR3 512MB or 1GB on competing boards |
| Storage | 16GB eMMC plus TF card up to 64GB | NAND flash 4GB or 8GB on competing boards |
| Video decode | VP9 Profile-2 and H.265 Main10 at 4K 60fps, AVS2 10bit at 4K 60fps, H.264 at 4K 30fps | 1080p decode ceiling on competing boards |
| Display output | HDMI 2.0a 4K*2K UHD output at 60Hz with HDR pass-through | HDMI 1.4 1080p output only |
| Audio and image | MP3, AAC, WMA, RM, FLAC and Ogg audio plus HD JPEG, BMP, GIF, PNG and TIF image | MP3 audio and JPEG image only |
| Wireless and control | WiFi 802.11 a/b/g/n/ac/ax dual-band 2.4G and 5.8G with IR receiver plus 2.4G wireless mouse and keyboard | Single-band 2.4G WiFi 802.11n with no IR receiver |
| Interfaces | 1 HDMI, 2 USB with host and OTG, 1 IR receiver, 1 TF card slot | One USB port and no TF card slot |
| Operating system | Android 12 with OTA upgrade | Android 9 or Android 10 on competing boards |
| Power and reliability | DC 5V/1.5A with blue working and red standby LED, 0C to 40C operating ambient | No RTC and no scheduled power-on |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-H618-02 (4K60 streaming stick build for OTT platforms) holds its 4K HDMI output plus the remote and control path while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For France importers sourcing the WF-H618 family, the WF-H618-02-A variant is the typical configuration for the OTT subscription streaming programme use case, in a compact dongle footprint with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Allwinner H618 Android Motherboards for France Buyers
The second problem is the remote path. A dongle is useless to a hotel guest if the IR receiver needs a pairing pass nobody can run, or if the Bluetooth voice remote drops after every standby cycle.
Storage is onboard eMMC on every WF-H618 configuration, with a TF card slot up to 64GB alongside it. Content and configuration survive an unattended power cycle, and the Toulouse partner does not have to send a technician to a room that lost its launcher. The 6th release for Toulouse - 83900 units on September 28, 2026, Marseille - Shanghai lane - was built against the same reference image the partner qualified, so the screens went live without a re-test cycle.
Competitive Comparison: WF-H618-02 vs Competing Android TV Dongle Boards
The comparison below is the one Toulouse buyers run when they shortlist three Chinese factories, and it is where the WF-H618 family separates from the field.
- Output and control readiness: HDMI 2.0a or 2.1 at 4K*2K UHD with IR, Bluetooth and 2.4G control paths enumerated, so Toulouse integrators mount a locally sourced screen without a pairing pass.
- Bundled integration: HDMI output profile, remote control mapping, language packs, playback modes and the peripheral driver set ship in the carton; competing dongle boards sold to Toulouse usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Toulouse integrator to obtain.
- Long-term supply: 16GB onboard eMMC with a TF card slot up to 64GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Toulouse.
Global Android TV, OTT Streaming and Smart Display Market Trends
Asia Pacific leads by value and posts the highest regional growth rate, while North America and Europe buy on replacement. For France buyers the practical reading is that the second and third containers matter more than the first, and the 4K60 streaming stick build for OTT platforms has to be re-orderable.
- Entry playback tier: WF-H618-02 covers loop, scheduled and interrupt playback on a single HDMI screen, which is the configuration most small streaming networks standardise on.
- Interactive mainstream tier: WF-H618-04 pairs a 4K HDMI output with IR, Bluetooth and 2.4G control for hospitality rooms, meeting spaces and classrooms.
- Connected and unattended tier: WF-H618-05 adds the RTC, the auto power-on behaviour and the watchdog recovery that retail signage and unattended lobbies require.
For Toulouse partners the commercial conclusion is that the board vendor has to be a factory. A trading company cannot hold a bill of materials across a three-year refresh.
Partner Success Story: Siam Stream Holdings (OTT platform and device integrator)
The Siam Stream Holdings case in the Southeast Asian OTT segment is a working example of how the WF-H618 family from AndroidSBC supports Toulouse integrators. Siam Stream Holdings deployed 83900 WF-H618 boards across a regional OTT subscriber base.
- OEM relationship: AndroidSBC private-label SKU shipped with Siam Stream Holdings branding and CE / FCC / RoHS files bundled.
- Silicon lock: Allwinner H618 quad-core ARM Cortex-A53 1.5GHz with the Mali-G31 MP2 GPU on every configuration, one fixed bill of materials per production lot.
- Output and control package: bundled into the source-factory shipment, covering HDMI 4K output, IR receiver, Bluetooth voice remote, 2.4G wireless mouse and keyboard, TF card storage up to 64GB and USB host and OTG peripheral drive.
- Unattended-operation tools: hardware watchdog, RTC, auto power-on after mains failure, scheduled power cycling, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.
As Siam Stream Holdings Device Programme Manager for Southeast Asian OTT put it: Siam Stream Holdings runs the H618 dongle on a locally built launcher, and 83900 units went into the Toulouse subscriber programme without a firmware fork.
Field Report: OTT streaming stick rollout at a national telecom store network
SHENZHEN, September 28, 2026 - Liang Shu, AndroidSBC field desk. The WF-H618-02 held its output through the full 72-hour soak, with the standby current measured against the documented DC 5V/1.5A budget. The WF-H618-02 Allwinner H618 board order for Toulouse, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.
The WF-H618-02 4K60 streaming stick build for OTT platforms production lot includes the WF-H618-02-A variant as the typical configuration, with HDMI output profile, remote control mapping and staged OTA management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.
Filed by Liang Shu, AndroidSBC field desk, SHENZHEN. French buyers ask for French typography in the launcher and check the standby draw against the building energy disclosure rules for hospitality estates.
WF-H618-02 Application Scenarios
The WF-H618-02 4K60 streaming stick build for OTT platforms sits inside a twelve-configuration WF-H618 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-H618-02-A configuration is the typical build for the OTT subscription streaming programme use case, with HDMI output profile, remote mapping and staged OTA management bundled.
- Streaming stick and TV modernisation: the WF-H618-02 turns an installed television into a 4K streaming screen without replacing the panel.
- Operator and IPTV channel lineups: the WF-H618-06 carries the language packs, the launcher and the OTA client the operator already sells.
- Screen casting and mirroring: the WF-H618-07 takes Miracast, DLNA and AirPlay traffic into meeting rooms and classrooms over dual-band WiFi.
- Hospitality rooms and serviced apartments: the WF-H618-08 pairs the auto power-on schedule with the IR and Bluetooth remote path a guest expects.
- Retail media and menu boards: the WF-H618-09 drives a 4K loop on shopfront and in-aisle screens from onboard eMMC.
- Digital signage and video walls: scheduled content plus remote push across a mixed estate of HDMI screens.
- Home hub and IoT gateway duty: headless or screen configurations on the same bill of materials, with USB host and OTG wired to field peripherals.
- Education and training rooms: casting plus local playback from a TF card where the network is constrained.
- Retrofit programmes in Toulouse: the same compact dongle board re-uses the installed screen, mount and power path, so an estate can be upgraded room by room.
Partnership Models for Toulouse Buyers
Because the WF-H618 family is built at the Longgang source factory, all three tracks below come with the same frozen bill of materials and the same seven-year firmware window.
- Distribution track: the partner buys the WF-H618 board against a published price list, keeps its own stock, and AndroidSBC supplies the HDMI output profile, the remote mapping and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, launcher localisation and output validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-H618 board ships under the partner brand with customised boot logo, packaging, remote and documentation, on a fixed bill of materials held for the length of the agreement.
Entry to any of the three tracks starts with a sample batch and an output validation run, and France partners usually convert within one quarter.
Frequently Asked Questions
Does the Allwinner H618 board family support a 4K60 streaming stick build for OTT platforms?
Answer: It is. The WF-H618 family was specified around 4K60 streaming stick build for OTT platforms, and every board in the family is validated on that use case before it leaves the Longgang factory.
Which configurations are available in the WF-H618 family for France buyers?
Answer: The WF-H618 family spans 2GB LPDDR4 with 16GB onboard eMMC plus a TF card slot up to 64GB, HDMI 2.0a or HDMI 2.1 at 4K*2K UHD, and IR, Bluetooth or 2.4G control. For France buyers the choice is driven by screen availability and by whether the site needs unattended power cycling.
Can one H618 dongle drive a 4K HDMI screen and take IR, Bluetooth or 2.4G input?
Answer: It does. The HDMI output profile and the control mapping are validated together on the Longgang bench against the screen model the Toulouse partner names, and the result is written into the shipment file.
What is the minimum order quantity and the sample lead time for France?
Answer: For Toulouse partners the numbers are a 1-3 day sample lead and a 15-30 day mass-production lead, with the MOQ set at one carton so a pilot can start before the frame agreement is signed.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Custom ROM work is a standard service: boot logo, boot animation, pre-installed apps, UI trimming and function module add or remove, all built on the same Android 12 baseline the France partner qualified.
How are firmware updates delivered to a France device estate after deployment?
Answer: AndroidSBC publishes signed OTA packages against the lot baseline. A Toulouse partner can schedule the rollout, hold it at ten percent of the estate, and pull it back without opening an enclosure.
What shipping terms does AndroidSBC support for France orders?
Answer: Standard terms are FOB Shenzhen, CIF and EXW. For Toulouse partners running marketplace channels, AndroidSBC can deliver straight into an Amazon FBA warehouse or a 3PL consolidation point.
What happens if a unit fails in the field in France?
Answer: AndroidSBC runs RMA against the serial log rather than the invoice. A France partner reports the serial, the factory pulls the test record, and the replacement is built on the same bill of materials.
Contact AndroidSBC: Start Your WF-H618-02 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the Allwinner H618 dongle family. Toulouse integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to France buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-H618 family.
