Overvoltage Protection Board, WF-X9-05, AndroidSBC, Toulouse

TL;DR: Overvoltage Protection Board

AndroidSBC field desk: signage rollout map updated across retail, transport, hospitality and public venues serving Toulouse, France. The WF-X9-05 X9 Android motherboard spans the infrared touch all-in-one for interactive kiosks and eleven sister configurations in the X9 series, all built on the A133 quad-core ARM Cortex-A53 1.6GHz SoC with the PowerVR GE8300 GPU, LVDS output at 1080p with 10-point infrared touch, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the X9 family from the Longgang source factory in Shenzhen to Toulouse and France importers who run advertising players, digital signage networks, self-service query terminals, smart retail terminals, parcel lockers and access control panels.

About AndroidSBC and the X9 Android Motherboard Family

AndroidSBC designs the X9 motherboards around the peripherals a screen site already owns: the thermal printer or QR scanner over USB, the card reader on serial, the lock driver board on a second serial lane, and the panel backlight on its own supply. The Toulouse integrator re-uses the existing harness instead of rewiring the enclosure. Panel validation happens on the Longgang bench with the actual LVDS or MIPI panel model the Toulouse integrator intends to use, and the jumper and pin-one result is written into the shipment file rather than left for the integrator to discover on site.

WF-X9-05 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-X9-05 (infrared touch all-in-one for interactive kiosks) holds its LVDS or MIPI panel drive plus touch sampling while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For France importers sourcing the X9 family, the WF-X9-05-A variant is the typical configuration for the interactive kiosk rollout use case, on a 120x75mm six-layer board with four 3mm mounting holes and a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing X9 Android Motherboards for France Buyers

Most Toulouse buyers start with three shortlisted Chinese factories and discover that two of them are trading companies quoting a board they do not build. The sample arrives, the second batch does not match, and nobody can produce the test record.

On the touch side the HID configuration ships in the carton. Infrared, optical, capacitive and resistive panels enumerate as standard HID devices, so the Toulouse integrator plugs the frame in and the screen reports touches without a calibration pass, and the ANFR documentation covers the radio modules too. The 6th container of X9 boards for Toulouse left the Longgang dock on September 24, 2026 carrying 145800 units, routed through the Marseille - Shanghai lane with the compliance file and the panel driver set already packed.

Competitive Comparison: WF-X9-05 vs Competing Commercial Display Android Boards

Competing boards reaching Toulouse usually win on unit price and lose on everything that happens after the first container. The four points below are where that shows up.

• Panel and touch readiness: single or dual LVDS plus MIPI DSI at 30 or 40 pins, with infrared, optical, capacitive and resistive panels enumerating as HID devices, so Toulouse integrators mount a locally sourced screen without a calibration pass.
• Bundled integration: panel jumper map, pin-one orientation note, touch HID configuration, playback modes and the peripheral driver set ship in the carton; competing display boards sold to Toulouse usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Toulouse integrator to obtain.
• Long-term supply: onboard eMMC in 8GB, 16GB or 32GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Toulouse.

Global Digital Signage and Commercial Display Market Trends

Two forces drive the France screen hardware cycle. The first is the shift from static print to managed digital content, which pushes the media player onto the board itself. The second is the total cost of ownership gap: retail digital signage TCO runs between 2.1 and 2.8 times the upfront hardware cost over five years, so the board that lasts longest wins the second order.

• Entry playback tier: WF-X9-05 covers loop, scheduled and interrupt playback on a single LVDS panel, which is the configuration most small signage networks standardise on.
• Interactive mainstream tier: WF-X9-09 pairs an LVDS or MIPI panel with infrared or capacitive touch for query, wayfinding and self-service kiosks.
• Connected and unattended tier: WF-X9-10 adds the 4G path, the -20C to 70C window and the watchdog behaviour that outdoor cabinets and parcel lockers require.

For Toulouse buyers the reading is straightforward: the market is growing on replacement, not on first-time installation, so the board that wins is the one that fits the enclosure already on the wall.

Partner Success Story: Gulf Screen Ventures (hotel and mall display integrator)

The Gulf Screen Ventures rollout in the GCC hospitality display segment shows how the X9 family from AndroidSBC supports Toulouse integrators. Gulf Screen Ventures installed 145800 X9 boards across 52 hotel and mall screens.

• OEM relationship: AndroidSBC private-label SKU shipped with Gulf Screen Ventures branding and CE / FCC / RoHS files bundled.
• Silicon lock: Allwinner A133 quad-core ARM Cortex-A53 1.6GHz with the PowerVR GE8300 GPU on every configuration, one fixed bill of materials per production lot.
• Peripheral driver package: bundled into the source-factory shipment, covering LVDS and MIPI panel drive, infrared, optical, capacitive and resistive touch, thermal printer, QR scanner, barcode scanner, NFC reader, RFID reader, ID card reader, fingerprint reader, camera and lock driver board.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.

In the words of Gulf Screen Ventures Programme Lead for GCC Hospitality Display: Gulf Screen Ventures runs Arabic and English content from the same X9 board, and 145800 units were accepted into the Toulouse hospitality group after a two-week pilot.

Field Report: interactive kiosk rollout at a municipal service point

NANSHAN, September 24, 2026 - Jin Tao, AndroidSBC field desk. The WF-X9-05 shipped with staged OTA enabled, so the France team can pilot an update on ten screens before releasing it across the estate. The WF-X9-05 X9 Android motherboard order for Toulouse, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.

The WF-X9-05 infrared touch all-in-one for interactive kiosks production lot includes the WF-X9-05-A variant as the typical configuration, with LVDS or MIPI panel driver, touch HID configuration and staged OTA management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.

Filed by Jin Tao, AndroidSBC field desk, NANSHAN. French retail media buyers ask for French typography and check the standby power figure against the building energy disclosure rules.

WF-X9-05 Application Scenarios

The WF-X9-05 infrared touch all-in-one for interactive kiosks sits inside a twelve-configuration X9 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-X9-05-A configuration is the typical build for the interactive kiosk rollout use case, with panel driver, touch HID configuration and staged OTA management bundled.

• Advertising machine and digital signage: the WF-X9-05 runs loop, scheduled and interrupt playback on an LVDS panel in shop windows and store aisles.
• Interactive query and wayfinding: the WF-X9-08 pairs a MIPI or LVDS panel with infrared or capacitive touch for lobby and hospital directories.
• Smart retail terminal and vending: the WF-X9-09 carries the scanner, the printer and the payment peripheral on one board in a compact enclosure.
• Parcel locker and fresh food cabinet: the WF-X9-10 drives the screen and the lock driver board from the two serial lanes, with the watchdog holding a 7x24 duty cycle.
• Face recognition access control: the WF-X9-11 takes the camera input and the door controller wiring on the same board.
• Conference tablet and teaching all-in-one: LVDS or MIPI panel drive with HID touch and the industry publishing software already validated.
• Industrial HMI and IoT gateway: headless or panel configurations on the same bill of materials, with GPIO, I2C, SPI, PWM and ADC available for field wiring.
• Hotel, building and campus information publishing: scheduled power cycling plus remote content push across a mixed estate of screens.
• Retrofit programmes in Toulouse: the same 120x75mm board re-uses the existing enclosure, panel and mounting pattern, so an installed estate can be upgraded screen by screen.

Partnership Models for Toulouse Buyers

AndroidSBC runs three commercial tracks on the X9 family, and Toulouse partners usually start on one and move to another as volume builds.

• Distribution track: the partner buys the X9 board against a published price list, keeps its own stock, and AndroidSBC supplies the panel files, the touch configuration and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, mounting drawings and panel validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the X9 board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed bill of materials held for the length of the agreement.

The Toulouse partner keeps the commercial relationship; AndroidSBC keeps the factory discipline. That division is what makes the tracks work at volume.

Frequently Asked Questions

Does the X9 Android motherboard family support an infrared touch all-in-one for interactive kiosks?

Answer: Yes - infrared touch all-in-one for interactive kiosks is supported across the X9 line, and the Toulouse configuration is locked as the reference for later lots so re-orders behave identically.

Which configurations are available in the X9 family for France buyers?

Answer: Twelve configurations are offered and they all share one Android 10 image, so a Toulouse partner can move between them without re-writing the application or re-qualifying the publishing software.

Can one X9 board drive an LVDS or MIPI panel plus infrared, capacitive or resistive touch?

Answer: It can. The X9 family is specified so one board carries the full site harness: panel, touch, printer, scanner and card reader, with no expansion card required.

What is the minimum order quantity and the sample lead time for France?

Answer: Sample lead is 1-3 days and mass production is 15-30 days. MOQ depends on the track - distribution partners work from the price list, private-label SKUs are agreed per configuration.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. The engineering desk handles custom ROM, boot branding, pre-installed apps, BSP porting and SDK modules, and the Toulouse partner keeps the same image across re-orders.

How are firmware updates delivered to a France screen estate after deployment?

Answer: The OTA channel is staged and reversible. A Toulouse network pushes to a pilot group first, and if a panel or touch regression appears the image rolls back to the previous build.

What shipping terms does AndroidSBC support for France orders?

Answer: The export desk quotes FOB Shenzhen, CIF and EXW, handles customs clearance, and ships globally. The Toulouse partner picks the term and AndroidSBC books the lane.

What happens if a board fails in the field in France?

Answer: Failures are handled against the serialised test record. AndroidSBC traces the unit to its lot, confirms the bill of materials, and ships a replacement from the Toulouse call-off stock or the next production slot.

Contact AndroidSBC: Start Your WF-X9-05 Sourcing Conversation

Toulouse integrators can reach the AndroidSBC export desk for the X9 Android motherboard family through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to France buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the X9 family.