Government Building Directory, WF-G3602, AndroidSBC, Toulouse

TL;DR: Government Building Directory

AndroidSBC field desk: guide kiosk rollout map updated across retail, transport, healthcare and hospitality venues serving Toulouse, France. The WF-G3602 smart guide kiosk Android motherboard spans the wayfinding information kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus eDP, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Toulouse and France importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

Why a source factory rather than a trading company: the WF-G smart guide kiosk Android motherboard family is designed, laid out, assembled and tested by Wanlin Manufacturing Group in Shenzhen, which means Toulouse integrators deal with the people who control the BOM. Custom display interfaces, custom touch controller pairing, custom memory and storage splits, custom dual-screen configurations and custom payment or ID reader interfaces are all changes that happen at the schematic and layout stage rather than as a favour from a middleman. France buyers also get the failure analysis loop: when a board comes back, the report comes from the line that built it, not from a distributor forwarding a ticket. Certification, carton labelling and palletisation for France are prepared in Shenzhen by the export desk before the Toulouse shipment leaves, and the test reports stay versioned against the board revision.

WF-G3602 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3602 (wayfinding information kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For France importers sourcing the WF-G family, the WF-G3602-A variant is the typical configuration for the public venue wayfinding and route planning use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for France Buyers

The sixth obstacle is lifecycle mismanagement. Toulouse programmes that start on a legacy part find themselves two years in with no spare boards, no firmware source and no migration plan, and France venue fit-out cycles are longer than the parts remain in production.

AndroidSBC treats the driver layer as part of the product. The WF-G smart guide kiosk Android motherboard family ships with capacitive and IR touch, QR code, NFC, barcode, thermal printer, RFID, ID card reader, camera and relay drivers integrated, so a Toulouse integrator writes the directory application rather than kernel patches for France sites. AndroidSBC has now closed the 6th consecutive quarterly window on this family, with 145800 boards scheduled for Toulouse and France on the Marseille - Shanghai lane as of September 18, 2026.

Competitive Comparison: WF-G3602 vs Competing Smart Guide Kiosk Android Boards

When Toulouse system integrators put the WF-G family next to a single-platform competitor, four differences show up repeatedly in France evaluations, and they are the differences that determine total cost across a multi-year venue estate.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Directory and wayfinding screens are being re-specified as content endpoints rather than as standalone displays. Grand View Research puts the global interactive kiosk market at USD 34.79 billion in 2024, and the segment analysis points to software as the fastest-growing component: the board in a wayfinding information kiosk build has to host the content client, the touch stack and the update channel, which is exactly what France integrators in Toulouse are now writing into tenders.

• Mall floor directories and tenant finders: WF-G3602 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G1330 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G1330 and the industrial WF-G1331 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G1331 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

AndroidSBC tracks these numbers for Toulouse and France planning purposes rather than as forecasts, and publishes the underlying assumptions to integrators on request.

Partner Success Story: Gulf Venue Ventures (mall and mixed-use developer supplier)

The Gulf Venue Ventures rollout in the GCC retail and hospitality segment shows how the WF-G family from AndroidSBC supports Toulouse integrators. Gulf Venue Ventures deployed 145800 WF-G mall guide boards across flagship malls and mixed-use concourses in the GCC.

• OEM relationship: AndroidSBC private-label SKU shipped with Gulf Venue Ventures branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.

In the words of Gulf Venue Ventures Director of Guest Experience for GCC Retail and Hospitality: Gulf Venue Ventures runs Arabic and English interfaces on the same estate, and the multi-language support on the WF-G board let Toulouse sites switch content per screen without maintaining two firmware images.

Field Report: wayfinding kiosk bank installation at a transit interchange

NANSHAN, Shenzhen, September 18, 2026 - Jin Tao, AndroidSBC field desk. The final gate was a driver autoload check: the WF-G3602 boards booted with the full peripheral set attached and enumerated every module before the wayfinding information kiosk content service started. The WF-G3602 smart guide kiosk Android motherboard order for Toulouse, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.

The WF-G3602 wayfinding information kiosk production lot includes the WF-G3602-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.

Filed by Jin Tao, AndroidSBC field desk, NANSHAN, Shenzhen. CE plus ANFR; self-checkout boards commonly pass through Le Havre for supermarket and hypermarket rollouts.

WF-G3602 Application Scenarios

The WF-G3602 wayfinding information kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3602-A configuration is the typical build for the public venue wayfinding and route planning use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3602 plus WF-G3399 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G1330 plus WF-G3602 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G1331 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G6180 plus WF-G3399 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G1330 plus WF-G6180 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G3399 plus WF-G1331 carry the guest orientation flow in Toulouse.
• Exhibition and museum interpretive display points: WF-G3602 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G6180 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Toulouse: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Toulouse Buyers

AndroidSBC runs three entry tracks for Toulouse and France partners, and the WF-G family is available on all three from the same source factory.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

The three tracks exist because Toulouse and France buyers enter at different stages: some start with a sample board, some with a tender, and some with a private-label programme already sold.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a wayfinding information kiosk?

Answer: Yes. The WF-G family ships wayfinding information kiosk as a stock configuration on Rockchip and Allwinner silicon alike, flashed and functionally tested at the Wanlin Longgang source factory before the lot leaves the line for France.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?

Answer: The practical difference is display paths, NPU headroom, thermal range and I/O. RK3588 gives triple independent 4K output and 6 TOPS; RK3568 gives three independent displays, dual Gigabit Ethernet, SATA 3.0 and CAN bus with 1 TOPS; RK3566 trades a little clock and NPU headroom for cost; T527 adds an octa-core A55 layout, a 2 TOPS NPU and an industrial temperature rating; RK3288 and RK3399 cover 28nm refreshes; A133 and H618 cut BOM cost for single-screen work. AndroidSBC maps RK3568 to the deployment rather than to the headline.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for France?

Answer: Yes. The Longgang factory keeps the CE, FCC, RoHS and REACH declarations on file for the WF-G family and adds ANFR plus CE marking with ANFR radio interface registration for France shipments. Toulouse importers receive the full dossier with the first lot, not after it.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: AndroidSBC quotes the WF-G family from one sample board with no minimum programme commitment. OEM private label opens at 100 pieces, ODM at 500 pieces, and the mass-production window is 15-30 days after BOM sign-off for France shipments.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. Firmware customisation is handled by the same engineers who keep the reference BSP, so a Toulouse request for a custom launcher, a locked kiosk mode or an added peripheral driver goes into the maintained branch rather than into a one-off fork.

How are software updates and long-term support handled on the WF-G family?

Answer: The update model is wave-based. A Toulouse venue group can nominate a pilot site, hold the rest of the estate on the previous build, and only release the next wave once the pilot is clean. Rollback is built into the update client on every WF-G tier.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. Delivery to Amazon FBA or a 3PL consolidation point is a standard option on the WF-G family, quoted on FOB Shenzhen, CIF Port of Marseille or DDP terms for Toulouse and France partners.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: Yes, and the replacement stock is held on the same tiers as the original order. A Toulouse partner reports a DOA unit with evidence, AndroidSBC ships a replacement from buffer stock, and the failed board is analysed at the Longgang line rather than scrapped.

Contact AndroidSBC: Start Your WF-G3602 Sourcing Conversation

Toulouse integrators can reach the AndroidSBC export desk for the WF-G smart guide kiosk Android motherboard family through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to France buyers, a 15-30 day mass-production lead to bulk orders, and a seven-year firmware update window to the WF-G family.