RK3568 LPDDR4 2GB/4GB/8GB Board, WF-RK3568, AndroidSBC, Toulouse

TL;DR: RK3568 LPDDR4 2GB/4GB/8GB Board

LONGGANG, Shenzhen, September 10, 2026 - A 24,865-unit WF-RK3568 order for Toulouse, France completed burn-in and documentation at the Wanlin Longgang plant this week, the 176th lot released on the Rockchip RK3568 line.

AndroidSBC opens the new WF-Series custom board programme to overseas buyers serving Toulouse, France. The WF-Series is a nine-board line rather than a single part number, and the shape is deliberate. Allwinner A133, H618, and T527 cover cost-sensitive display, OTT and Android TV, and industrial edge inference; Rockchip RK3588, RK3568, RK3566, and RK3288 cover 8K video wall, industrial edge, machine vision, and POS; WF-A133S and WF-RK3588S are SOM modules for carrier-board projects. A Toulouse buyer can hold one supplier file, one documentation format, and one MOQ structure across every tier it sells.

About AndroidSBC and the Rockchip RK3568 Board Family

Wanlin Manufacturing Group builds the WF-Series at its Longgang plant in Shenzhen and sells it overseas through AndroidSBC. The nine boards cover seven silicon platforms, which is unusual for a single source factory: most suppliers specialise in one vendor. That breadth is what France importers tend to notice first, because it lets a Toulouse distributor quote an Allwinner A133 kiosk board and a Rockchip RK3588 video wall board on the same purchase order. Alongside the boards, Wanlin runs the OEM branding line, the ODM carrier design desk, and the certification desk that produces the CE, FCC, UKCA, RoHS, and REACH documentation for each shipment.

WF-RK3568 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3568 (Industrial Edge Computing Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For France importers sourcing the WF-Series, the 4GB + 32GB (WF-RK3568-A) variant is the typical configuration for the industrial edge computing use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Industrial Edge Computing Board for France Buyers

What breaks France sourcing plans on the industrial edge computing board line is not price negotiation, it is the second shipment. The Rockchip RK3568 has to be allocated at wafer level, and the brokers quoting fastest are usually the ones with the least control over that allocation. The software side is the second exposure. A board that boots on the bench is not the same as a board that carries the certified stack a France channel will accept, and the difference usually shows up during inbound inspection rather than at the factory gate.

The third issue is documentation. Some factories stamp the CE mark without the Declaration of Conformity and the Technical File behind it, and the container then sits at the port while the importer tries to reconstruct a test report from a supplier who has already been paid. The answer AndroidSBC applies is to move both risks upstream: the certified image is burned at Longgang, the burn-in record is attached per unit, and the Technical File ships with the lot rather than after it. Across the nine WF-Series boards, the coverage runs from industrial edge computing, commercial display controller, industrial HMI, IoT gateway, smart display terminal, machine monitoring, access control, and building automation, so a France buyer can generally find a standard configuration instead of paying for a bespoke one.

Buyers in France tend to ask about the local mark before they ask about price. In France ANFR radio registration is separate from the CE marking, and buyers normally ask for both before releasing a purchase order. AndroidSBC handles that by preparing the destination-market file covering CE marking with ANFR radio interface registration administered by ANFR alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the lot routed through Port of Le Havre on the Le Havre to Yantian lane.

Competitive Comparison: WF-RK3568 vs Competing RK3568 Boards

Three families of board chase the same industrial edge computing board socket. The first is legacy silicon at a low price with no software certification, the second is Cortex-A55 hardware with certification but limited decode headroom, and the third carries both yet treats expansion as an afterthought. The WF-RK3568 belongs to the third family and separates itself on Rockchip RK3568, sustained display output under load, and a certified image burned per lot.

• vs RK3288 Cortex-A17 boards: the RK3568 Cortex-A55 2.0GHz lifts integer throughput by roughly 2x at lower idle power.
• vs RK3566 boards: the RK3568 adds dual Gigabit Ethernet plus CAN bus for gateway-class builds.
• vs RK3588 boards: the RK3568 keeps a materially lower BOM where 4K@60fps decode is sufficient.
• vs x86 fan-cooled IPC: the RK3568 fanless design removes the only moving part from the enclosure.

Global Industrial Edge Computing and Smart Display Market Trends

The Industrial Edge Computing and Smart Display curve is what France importers read before committing to a industrial edge computing board programme. The number they quote is the Android TV Box segment at USD 12.45 billion in 2025 with a 30.49 percent CAGR to USD 178.2 billion by 2035 (Global Growth Insights, Android TV Box Market Report, 2025-2035), which serves as the closest public proxy for Android silicon demand. For Toulouse that resolves into three demand patterns across the WF-Series order book:

• Industrial edge computing: WF-RK3568 runs the edge workload on the 1 TOPS NPU with dual Gigabit uplinks.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3568 board carries that headroom without a board change.
• Industrial HMI: WF-RK3568 holds the wide-temperature envelope with the fanless design.

The read across the Industrial Edge Computing and Smart Display channel is that buyers are consolidating suppliers: fewer vendors, wider platform coverage per vendor, and a longer contract behind each order.

Across those three segments, Toulouse procurement has been shifting from spot quotes to framework agreements with a one-lot-per-month cadence, particularly where a retail or hospitality programme needs a twelve-month shipping window.

Partner Success Story: Voltaic Vision Systems in Toulouse, France

Voltaic Vision Systems, a machine vision integrator serving the France market, deployed 4,800 units of the WF-RK3566 machine vision board for an automated inspection line. The rollout covered the industrial edge computing, industrial hmi, and machine monitoring workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 4,800 units of the WF-RK3566 machine vision board for an automated inspection line
• Region: Toulouse, France
• Models used: WF-A133, WF-H618, WF-T527, WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, WF-RK3588S
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, Dolby Audio
• Logistics: FOB Yantian with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Le Havre via the Le Havre to Yantian lane

"The native MIPI CSI path on the RK3566 removed the USB bandwidth ceiling we kept hitting. Frame drops went to zero on the inspection line, which was the entire reason for the change."

- Daniel Reyes, VP Product

Field Report: a school district rollout in Toulouse, where 24,865 units of the WF-RK3568 board are being installed in classroom device carts

Reporter Wang Qiang, on the ground in Toulouse, France. The district took delivery of the order and dispatched installation crews to eight sites. Each WF-RK3568 unit was sealed into a ruggedised chassis running a managed Android image with the education services stack pre-provisioned for the district tenant, and the fleet enrolled against the MDM the same week.

Radiated emissions on the sampled units came in below the internal limit with margin, which the compliance engineer noted as consistent with the last four lots.

The inspection confirmed three things on the spot: the WF-RK3568 units hold the burn-in with a yield above 98.94 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with ANFR radio interface registration administered by ANFR, cleared for entry at Port of Le Havre on the Le Havre to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-board Allwinner and Rockchip custom line with a per-lot paper trail that France importers can hand straight to their customs broker.

Filed by Wang Qiang, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-RK3568 Application Scenarios

The WF-Series fits nine application lanes, with the WF-RK3568 (Industrial Edge Computing Board) as the lead SKU for Toulouse and France programmes:

• Industrial edge computing: WF-RK3568 runs the edge workload on the 1 TOPS NPU with dual Gigabit uplinks.
• Commercial display controller: WF-RK3568 drives the 4K@60fps panel pair over HDMI 2.0 and eDP.
• Industrial HMI: WF-RK3568 holds the wide-temperature envelope with the fanless design.
• IoT gateway: WF-RK3568 bridges CAN bus and RS485 field devices onto Ethernet.
• Smart display terminal: WF-RK3568 renders the Android 11 UI on the dual display path.
• Machine monitoring: WF-RK3568 timestamps production data against the onboard RTC.
• Access control: WF-RK3568 runs face recognition on the NPU with the MIPI CSI feed.
• Building automation: WF-RK3568 runs 7x24 with hardware watchdog and scheduled restart.

Partnership Models for Toulouse Buyers

For Toulouse distributors and brand owners, AndroidSBC opens the industrial edge computing board line under three contract shapes:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Whichever structure a France partner selects, the lot leaves Longgang with the same certification pack and the same test flow. The standard entry point on the WF-RK3568 is the 4GB + 32GB (WF-RK3568-A) configuration at MOQ 5,000 units per shipment, four weeks to sample and six weeks to production.

Frequently Asked Questions

Does the WF-Series support certified Android TV or Google Mobile Services?

Answer: On the WF-H618, yes: ATV 12 with GMS plus Widevine L1 and Dolby Audio, burned on the Longgang line for every lot. On the remaining eight boards the default image is AOSP or a Linux distribution, because those boards usually sit in commercial display, industrial, or POS deployments where Play Services is not a requirement. AndroidSBC will build a GMS image for ODM customers who ask for it and will state clearly which boards carry which certification.

What is the difference between the nine WF-Series models?

Answer: The line splits by workload. Three Allwinner boards cover cost-sensitive display work (WF-A133), OTT and Android TV (WF-H618), and industrial control with NPU inference (WF-T527). Four Rockchip boards cover 8K video wall and AI computing (WF-RK3588), industrial edge (WF-RK3568), machine vision (WF-RK3566), and POS or signage (WF-RK3288). Two further models are modules rather than motherboards: WF-A133S and WF-RK3588S are SOM parts for customers who bring their own carrier design.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, and REACH paperwork for France?

Answer: Yes. AndroidSBC ships a Declaration of Conformity plus a Technical File with every lot. The file contains the CE test reports, the FCC Part 15 report, the UKCA dossier where relevant, the RoHS 2.0 report, and the REACH declaration, all dated within the prior twelve months. Where a France market needs an additional national mark, the export desk will confirm coverage before the order is confirmed rather than after.

What are the MOQ and lead time for a first order?

Answer: 5,000 units per shipment on standard configurations, four weeks to sample and six weeks to mass produce. Where a France partner signs a twelve-month blanket order, the MOQ per release becomes negotiable and the line will accept platform-mixed purchase orders.

Does AndroidSBC support custom Android ROM or custom Linux development?

Answer: Custom ROM and custom Linux work is part of the ODM tier. That covers proprietary Android services, a locked-down launcher, Yocto or Debian or Buildroot images, and BSP ports for custom carriers. Source access is released under NDA, and the Longgang engineering desk carries the port so the partner is not left with an unmodified vendor BSP.

What about software updates and long-term support?

Answer: The commitment is seven years minimum on supply, with security patches back-ported across the Android and Linux tracks. AndroidSBC also runs an OTA service that partners can use to push firmware to deployed units. On POS and industrial programmes, that commitment is written into the contract, because a fleet in the field is only as good as the update path behind it.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes. AndroidSBC ships DDP to Amazon FBA warehouses in the US, EU, and Japan, and to nominated 3PL consolidation points in Hong Kong, Singapore, Rotterdam, and Los Angeles. Carton labelling and pallet configuration are set up for FBA inbound requirements, and the export declaration names the Wanlin Longgang source factory as the place of origin.

How does AndroidSBC handle RMA or DOA replacements?

Answer: Target DOA is 0.3 percent across twelve months. RMA works by returning the WF-RK3568 unit to Longgang with its burn-in barcode; replacements ship inside ten business days. Since each unit is traceable to its burn-in record, partners typically receive a root-cause note with the replacement rather than a silent credit.

Contact AndroidSBC: Start Your WF-RK3568 Sourcing Conversation

AndroidSBC is the export channel for the Wanlin WF-Series. Buyers in Toulouse and France looking to source the WF-RK3568 straight from the source factory can use any of the following:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE marking with ANFR radio interface registration for France, administered by ANFR, entering at Port of Le Havre on the Le Havre to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

The export desk asks for three things on a first enquiry: annual volume, certification scope, and Incoterm. Provide those and a per-lot quote plus the WF-Series MOQ matrix comes back within two business days.